Uprights
All dimensions are in mm.

Back to Products
Support – S 6mm Panel Support – 6P 12mm Panel Support – 12P
This is the basic wall mounting upright which holds all brackets, clips etc. Fixing: No 8 countersunk screws spaced 101mm apart. Available in 305mm multiples up to a maximum length of 3660mm. This upright holds 6mm mirrors or panels against a wall. Other details are similar to type S upright. Available in 305mm multiples up to a maximum length of 3660mm. This upright holds 12mm thick panels against a wall. Other details are similar to type S upright. Available in 305mm multiples up to a maximum length of 3660mm.

Small re-inforced upright
Small re-inforced uprights consist of a steel hollow section to which one or two aluminium uprights of any type are screwed.
SRU1 is the single sided version.
SRU2 is the double sided version.
Available to order up to a maximum length of 1830mm.
Medium re-inforced upright
Medium steel re-inforced uprights consist of a steel hollow section to which one or two aluminium uprights of any type are screwed.
MRU1 is the single sided version.
MRU2 is the double sided version.
Available to order up to a maximum length of 2745mm.

Small Adjustable End Plate

Maximum height 1830mm if supported at top and bottom

For SRU1 and SRU2
SAP – Adjustable end plate
SFP – Fixed end plate
Medium Adjustable End Plate

Maximum height 2745mm if supported at top and bottom

For MRU1 and MRU2
MAP – Adjustable end plate
MFP – Fixed end plate
Internal or ‘invisible’ end fittings are available:
SIP – Small invisible plate MIP – Medium invisible plate
Back to Products